Hi Pam, I can’t comment on the Longer, as I’ve never used one – but they *should* be fairly similar to the anycubic photon.
Increase the number of supports to avoid the parts from moving too much during the print and stop cracks.Note: Settings above tested on Anycubic PhotonIt is important to ensure that enough supports are being used to print your part.
The Anycubic Photon Slicer lets you decide what layer of support you want: light, medium, or heavy.
If you're using a Mac, you may need to navigate to "System Preferences > Security & Privacy > Open Anyway" after attempting to launch ChiTuBox for the first time.Never clean your prints in the kitchen or anywhere that food is prepared, unless the resin manufacturer has published an SDS (safety data sheet) indicating that there's no ingestion health risk.Whether or not you're new to 3D printing, printing on the Photon is different than most 3D printers on the market today. Here is approximate curing time for HARZ Labs resins for Anycubic Photon. If you don’t mind working with messy resin, the Anycubic Photon 3D printer offers print quality that very few filament-based printers can achieve.
Then copy the ones required to the ‘Profiles’ folder in your Creation Workshop folder. When you buy a tool or material through one of our Amazon links, we earn a small commission as an Amazon Associate.Follow @howchoo and learn cool things:I'm going to use ChiTuBox since it's the industry standard for SLA/DLP/LCD 3D printing. Find settings by selecting your 3D printer Asiga Anycubic Photon Anycubic Photon S B9Creations EnvisionTec FormLabs Form2 MiiCraft Phrozen Solus Moonray Asiga EasyCast HD Brown 25µm Profile Anycubic Photon EasyCast HD Violet 50μm Curing Time: 15s Base Settings: 90 Base: … Read More BASE LAYERS Rapid Model Resin Dental Rapid Flex100 Rapid TUFF™ Rapid; Height of Base layers (millimeters) 0.05mm. This will aid in forming a strong bond between parts and the build platform.For detailed parts, we recommend you use the detailed setting.Compatible with UV LCD printers such as Anycubic Photon, Wanhao D7, Phrozen Shuffle, Sparkmaker, Kudo BeanIf you are using a laser printer that’s not Formlabs, follow the manufacturer’s instructions on slicing and then pour the resin into the vat and start printing.Holes in the sides are often caused by blowouts due to air cupping. ¯\_(ツ)_/¯This thing really does produce stunningly-detailed prints.After you've been printing a while, you'll be able to pour in less and less resin as you learn how much is needed for a given print.Make sure the printer itself is on a level surface, or the resin will all pool to one side.A layer height of 0.02 is overkill for most prints; I just want to see what this thing can do at super fine detail.Once the print is finished, we'll need to clean the resin from it and let it cure fully.SLA printers use a focused or UV light on a resin vat to "cure" each layer of your print.When you're done, close the front cover.
This is because the Photon is an SLA (Stereolithography Apparatus) printer, whereas most 3D printers are FDM (Fused Deposition Modeling).One thing that's super interesting about SLA vs. FDM printers is that adding additional models to an SLA print doesn't always increase print time. Otherwise, make sure the printer cover is always shut while running so that the light won't damage your eyes.If you want to reuse the excess resin, you can do so by running it through the paper filters that came with the printer and pouring it back into the resin bottle. Settings for Anycubic Photon . I'm using resin from monocure (i have about 5 colours, including black), my slicer is set as follows: Base Layers: 10 Bottom Exposure Time: 180 Normal Exposure: 12.